Safence slope barrier
Mounting
Anchor
A
prefabricated anchor is placed in a prepared hole or is cast on site at the end
of each section
Prefabricated anchor
Post
A hole is made with a power
hammer.
A hole is made
No post footing is required when installing
the slope barrier post.
Installation of
slope barrier post
A wire hook is mounted
Installation
of wire ropes
End fittings are swaged on to the ropes
Mounting of end fitting
Installation of wire ropes
The
hooks are screwed into the posts.
Rigging screws
and end fittings.
Mounting of rigging screw.
Rigging screw
Check ropes are installed on
each wire.
End fittings and check ropes mounted in anchor
Tensioning
Tension the wire ropes using the nuts on the anchors. Tension each wire at
the rigging screws, starting in the middle